How to repair a helmet cable that does not work

Here's how easily you can repair your damaged headphone cable: simple steps

Surely you had to get rid of your headphones on some occasion because the cable was broken. This is something that always happens, often through wear and tear, by accident or just by chance. Trust us, it's more common than many think.

In any case, it is likely that it will not be necessary to make an additional expense to have to buy new headphones and that in a few simple steps you can recover them to continue enjoying your favorite music as if nothing had happened.

Here are the steps to repair a damaged cable

If you want to know how to fix your broken headphone cable in minutes, take a look at our walkthrough where we'll tell you everything you need to do to become a DIY and home repair master .

Headphones not working on your mobile? So you can repair and clean the socket

Learn how to repair headphone cables from the inside in a few simple steps

The first thing to keep in mind before starting the repair process is to have all the tools and materials required. In this case, you must have the following items on hand:

You can still salvage damaged hearing aid cables by following these simple steps

Knowing the materials and tools you need, it's time to get to work and start repairing your wiring. This process is very simple, yes, you have to be careful when doing it.

First step

Step 1: find a cable cutter

The first step is to use the razor, cutter or cable cutter to make a cleaner cut in the cable that had been broken and thus expose its interior. Once done, you will need to strip the cable by removing the outer covering and exposing the internal wires. At this point, enjoy preheating the soldering iron for later.

Consider leaving at least an inch of wire exposed so you can join them later. Repeat this step on both ends of the cables at their breaking point.

Second step

Step 2: Join the broken wires from both ends

Once you've stripped the wire and removed the outer sheath, it's time to join the broken wires at both ends. Before that, you need to pass one end of the cable through the heat-shrink tubing, sliding it enough that it doesn't load the exposed end of the cable to be terminated.

Now take the ends of the even wires (red to red, green to green, etc.) and join the two ends together, twisting them until a strong joint is achieved.

After that, use the soldering iron that we previously heated and put some tin on the joint of each cable. By melting, it will help the cables not to separate and the connection to stay together well. Leave to cool for a few seconds.

Third step

3rd step: cover the joints and apply heat with a lighter

Once you have joined the two ends of the cable, slide the heat shrink tubing down until the joints are covered and using a lighter, lighter or heat gun, apply heat to the tube, so that it contracts and adheres to the joint cable. . This will serve as a protection for the connection and avoid failures later.

If you don't have those heat shrink tubing, you can just cover the joint of the wires with electrical tape and it will work just as well. It might not be so aesthetic, but it will be functional. And voila, you will have already repaired the cable of your headphones.

As you will see, this is a fairly simple and quick process with which you can recover your headphones and continue listening to your favorite music or content.

Best of all, it's a fairly inexpensive solution with materials readily available at home. Share it with that person who always damages their helmet or just use it when you need it.

The nightmare of tearing down and repairing a bluetooth headset, according to iFixit

If you liked this article, don't hesitate to take a look at how to repair your screen like a pro with these mobile repair kits, or also discover the easiest way to (good) repair a mobile that is fall in the water. And if you're looking for something riskier, check out this definitive guide to fixing your terminal.

Related Topic: Headphones